Skip to main content

EIA: gas storage design capacity slightly up

Published by
Hydrocarbon Engineering,

The US Energy Information Administration’s (EIA) latest ‘Today In Energy’ report suggests that relatively little new underground natural gas storage capacity was built in the Lower 48 states over the past four years.

EIA measures natural gas storage capacity in two ways, namely design capacity and demonstrated maximum working gas volume (or demonstrated peak). In 2017, design capacity grew by approximately 1%, and demonstrated peak fell by 1%.

Design capacity is the sum of the working gas capacity for all active facilities in the Lower 48 states as of November 2017. Design capacity is based on the physical characteristics of the reservoir, installed equipment, and operating procedures particular to the site. Nationally, design capacity rose by 34 billion ft3, or 0.7%, between November 2016 and November 2017. This increase was driven by expansion in the East storage region, where design capacity grew by 30 billion ft3 (2.9%) in 2017.

Most of the incremental capacity last year came from expansions to existing facilities, and expansions were heavily concentrated in the East region, where natural gas production has grown almost continually since 2009. Several facilities in Ohio and West Virginia likely expanded in 2017 to accommodate increasing levels of natural gas production in the Appalachian Basin.

Demonstrated peak is the sum of the highest storage levels reached by each storage facility over the most recent five-year period, with the most recent period covering December 2012 to November 2017 (the beginning of each yearly heating season). Demonstrated peak indicates how storage facilities were actually used, not just how they were designed.

The demonstrated peak fell by 46 billion ft3, or 1%, in 2017. EIA began tracking peak capacity metrics in 2011, and 2017 marks the first year that the demonstrated peak declined. The decline was partly because the new five-year range does not include 2012, a year that saw very high inventory levels because of record warm weather.

Storage capacity in a given state may be a function of several things, including production, consumption, existing infrastructure, geography, and geology. States with high levels of natural gas production, such as Texas and Louisiana, also tend to have substantial volumes of underground storage capacity. These states have well-developed natural gas infrastructure, many large industrial and electric sector consumers, and geology that is amenable to storage.

Michigan has the highest amount of natural gas storage design capacity in the country, but it has modest levels of natural gas production compared with Texas and Louisiana. However, Michigan relies heavily on natural gas for winter heating needs and has several factors that have led to investments in storage: several major pipelines that connect to Canada and other Midwestern states, nearby population centres such as Chicago, and depleted production fields that it was able to convert into storage fields.

Read the article online at:


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Downstream news