Skip to main content

DuPont Clean Technologies Signs Contract with ISAB S.R.L.

Published by , Senior Editor
Hydrocarbon Engineering,

DuPont Clean Technologies has signed a contract with ISAB S.r.l. (ISAB), wholly owned by LUKOIL, to revamp the existing trickle bed diesel hydrotreater at the Priolo Refinery in Siracusa, Italy with the IsoTherming® Hydroprocessing Technology.

ISAB commissioned DuPont for the project in an effort to increase unit capacity to a target of 205 m3/hr while also extending catalyst cycle length.

IsoTherming® Diesel Hydrotreaters enable refiners to produce high-quality, low-sulfur fuels that comply with increasingly stringent environmental requirements, but at lower energy consumption rates and operating costs than trickle bed hydroprocessing units. The IsoTherming technology is commercially proven to process a wide range of feedstocks, from kerosene to vacuum gas oil, including 100% light cycle oil. The units are designed to provide refiners with consistent utility savings of 30 - 60% and capital cost savings potential up to 30% compared to trickle bed technologies.

“We are delighted to have the opportunity to work with ISAB on this project,” said Kevin Bockwinkel, Global Business Manager, IsoTherming Hydroprocessing Technology. “In addition to producing high-quality, low sulfur fuels, our IsoTherming technology will grant ISAB the opportunity to process more difficult, cracked feedstock without sacrificing product quality all while extending catalyst cycle length. Utilising the IsoTherming technology allows us to accomplish all of this without additional catalyst volume, thus maximising the benefit to the refinery without the need for significant capital investment. We look forward to expanding upon our strong relationship with ISAB and continuing it for years to come.”

Startup of the IsoTherming Diesel Hydrotreater at the Priolo Refinery is expected to take place by 2024.

The IsoTherming hydroprocessing technology utilises a novel liquid-phase reactor system, using hydrogen and catalyst more efficiently. The technology is suitable for a wide range of applications, including 100% kerosene hydrotreating, 100% light cycle oil (LCO) hydrotreating, transmix hydrotreating, diesel hydrotreating, FCC feed hydrotreating (VGO hydrotreating), mild hydrocracking, dewaxing, gas-to-liquid (GTL) upgrading, and heavy oil upgrading for both grassroots and revamp configurations.

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Downstream news