Skip to main content

Compact re-design for Atlas Copco energy recovery units

Hydrocarbon Engineering,

Atlas Copco has announced a complete re-design of the stand-alone, retrofit energy recovery units for its GA compressors. The new ER range now offers improved performance and a smaller footprint.

According to Atlas Copco, as much as 94% of the electrical energy used by industrial compressors is converted into heat and lost through radiation in the compression process. The remaining 6% is converted into compressed air heat losses. The new ER units recover up to 94% of this thermal energy to heat water up to 90 °C for a number of process and domestic applications such as showers or central heating.

The ability for application industries to generate pre-heated water via Atlas Copco’s ER energy recovery systems helps reduce the costs of traditional energy sources and minimize the environmental impact of their CO2 emissions.

Development of the new ER concept was driven by market needs. The more compact design recognizes the space limitations of point-of-use sites and compressor rooms. There is also a broader selection of models.

The fully pre-assembled, plug-and-play range comprises three single cooler models: ER S1, S2 and S3 and two twin cooler versions, ER S4 and S5, specifically designed for optimum oil pressure and flow through the unit. All of the Atlas Copco ER units’ mechanical parts are pre-mounted within the canopy to reduce commissioning time, simplify maintenance and minimize the risk of incorrect connections.

The ER heat exchangers are now vertically configured to reduce unit footprints; compared with previous models the single cooler version’s floor space dimensions are now reduced by 66% and those of the twin-cooler model by 33%. The units are offered with the option of complete, corrosion-free stainless steel construction, for applications where water purity is critical, or as a lower-priced stainless steel plate, copper brazed alternative, which provides a lower price alternative for non-critical water applications.

All ER units are provided with temperature sensors for ER water inlet and outlet temperature levels, these conditions can be displayed on the compressor Elektronikon controller or the ER unit energy saving counter, if fitted. Additionally, the SMARTLINK remote monitoring system allows users to continuously monitor and analyse these and other compressor conditions via an online portal. This feature allows easy creation of energy saving reports for ISO50001, ISO14001 and ESOS accreditation.

Adapted from a press release by Emma McAleavey.

Read the article online at:


Embed article link: (copy the HTML code below):