Skip to main content

ABB to power LNG hybrid tug

Published by
Hydrocarbon Engineering,


ABB has announced that its electric propulsion, power, energy storage, control and automation technology will be at the heart of the first tug in South Asia capable of switching between low emission LNG engines and zero-emission battery power.

The tug, which will operate in Singapore harbor, has been ordered by Sembcorp Marine subsidiary Jurong Marine Services for delivery from the Sembcorp Marine shipyard by the end of 2020.

The project represents the first delivery of ABB’s power and distribution system Onboard DC Grid™ for a tug application. The vessel will be able to deploy 904 kWh of battery power for zero-emission operation, as well as for peak shaving – improving utilisation of electricity use on board.

Gas fuelled engines face a particular challenge when it comes to handling the fast-changing load capabilities demanded by tugs. Leveraging the Onboard DC Grid system, the tug’s engines will be able to run at variable speeds for optimised LNG fuel economy at each load level.

Additionally, through integration with an energy storage source, the batteries will be able to provide power to the tug’s propulsion system almost instantaneously. Leveraging the capabilities of Onboard DC Grid, the LNG engines will not have the need to be tied to a fixed speed against dynamic loads, and would be able to provide energy at variable revolutions per minute (RPM), further enhancing efficiency, responsiveness and sustainability of tug operations. ABB’s scope of supply also includes the DC drives for the PTI/PTO variable speed shaft generator, which integrates with the energy storage battery.

Read the article online at: https://www.hydrocarbonengineering.com/gas-processing/15042020/abb-to-power-lng-hybrid-tug/

You might also like

 
 

Embed article link: (copy the HTML code below):


 

This article has been tagged under the following:

Downstream news