ExxonMobil announces availability of oil for use with 0.5% sulfur fuels
Published by Tom Mostyn,
Editorial Assistant
Hydrocarbon Engineering,
ExxonMobil has announced its new 40BN cylinder oil, MobilgardTM 540, will be available from 2 September 2019. The lubricant has been specifically formulated for use with 0.5% sulfur fuels that comply with the International Maritime Organization’s (IMO) 2020 emission regulations and meets the requirements of OEMs, MAN ES and WinGD.
Mobilgard 540 will be available from launch in major ports around the world including Hong Kong, Singapore, Antwerp, Rotterdam and Amsterdam. It will also be offered at additional locations through ExxonMobil’s delivery network, in bulk and in packs. Details and further updates will be available via the company’s Ports and Services guide.
ExxonMobil offers a comprehensive range of marine products and services, including two-stroke cylinder oils, regardless of compliance choice:
- MobilgardTM 525 for use with 0.10% sulfur Emission Control Area (ECA) MGO.
- MobilgardTM 540 for use with 0.50% IMO compliant fuels.
- MobilgardTM 570 for use with high sulfur fuel in combination with a scrubber.
- MobilgardTM 5100 for highly corrosive engines running high sulfur fuel in combination with a scrubber.
- Mobil ServTM Cylinder Condition Monitoring for on-board scrape down oil analysis and fuel sulfur testing.
Vessel operators should now be making decisions about their fuel choice ahead of the regulatory change, an assessment that could also impact cylinder oil selection. ExxonMobil believes that on-board stock management and collaboration across the operation will be essential to ensure a smooth fuel and lubricant transition. Vessel engineers should therefore work closely with procurement personnel and charterers to ensure that fuel choices are transparent, timelines are clear and the impact on a vessel’s operation is understood.
Mobilgard 540 is compatible at any volume with ExxonMobil’s current MobilGard cylinder oil range, which will help to streamline the switchover to the new lubricant as no tank cleaning will be required. ExxonMobil has developed a step-by-step guide to help the maritime industry safely and effectively navigate the fuels and lubricants switchover process.
“Mobilgard 540 is an extension to our long-standing MobilGard cylinder oil range. Used in combination with ExxonMobil's EMF.5 fuels range, it will enable vessel operators to have confidence when complying with the IMO’s revised sulfur limit, without compromising on quality or performance,” said Frans Horjus, Global Marine Lubricants Manager at ExxonMobil.
“However, the switch to a low-sulfur future will require careful stock management. As part of this procedure, vessel operators should work with fuel and lubricant suppliers that possess the technical skills to help them manage the switchover process.”
Read the article online at: https://www.hydrocarbonengineering.com/clean-fuels/21082019/exxonmobil-announces-availability-of-oil-for-use-with-05-sulfur-fuels/
You might also like
IEA: faster progress on energy efficiency required
The IEA reports that doubling the global rate of improvement will require countries to accelerate policy implementation, which would improve energy security, reduce energy costs and lower emissions.