Skip to main content

EIA: hydrogen for refineries provided by industrial suppliers

Published by
Hydrocarbon Engineering,


Refineries use hydrogen to lower the sulfur content of diesel fuel. Refinery demand for hydrogen has increased as demand for diesel fuel has risen both domestically and internationally, and as sulfur content regulations have become more stringent. EIA data show that much of the growth in hydrogen use at refineries is being met through hydrogen purchased from merchant suppliers rather than from increased hydrogen production onsite at the refinery. The increased use of purchased hydrogen has implications for the refining industry's use of natural gas as a feedstock.

There are two forms of hydrogen production: on-purpose hydrogen production using steam methane reformers (SMR), and hydrogen production as a byproduct of other chemical processes. Natural gas is used almost exclusively as feedstock for on-purpose hydrogen production in SMR units in the US. Refineries, industrial gas producers, and other chemical manufacturers all use the same SMR technology, which is 90% efficient in producing hydrogen.

Byproduct hydrogen can be obtained from a chemical plant or other facility for which hydrogen is not the main product. In the chemical industry, for example, the chlor-alkali industry produces hydrogen as a byproduct of chlorine production, and petrochemical plants release hydrogen as a byproduct of their olefin production. Refineries also produce some byproduct hydrogen from the catalytic reforming of naphtha into higher value high octane products, but that supply meets only a fraction of their hydrogen needs.

EIA surveys petroleum refineries and provides estimates of net hydrogen demand at the refinery, natural gas feedstock used to produce hydrogen, and hydrogen production capacity on an annual basis. Because the total amount of hydrogen demand is known, and onsite production in the refinery SMRs can be derived from the surveyed natural gas feedstock requirements based on the known characteristics of the SMR process, the amount of merchant hydrogen supplied can be calculated by subtracting this onsite production of hydrogen from total refinery hydrogen demand. Comparing 2008 and 2014, onsite refinery hydrogen production changed very little (less than 1%), while hydrogen supplied by merchant producers increased by 135%.

Industrial gas producers are well suited to deliver a consistent supply of hydrogen to petroleum refineries using a combination of SMR production and by-product hydrogen from nearby chemical plants. In addition, industrial gas producers are able to take advantage of an expanding network of hydrogen gas pipelines, especially in the US Gulf Coast, which enhances their reliability to distribute hydrogen to their customers.

Because the growth in supply of hydrogen used at refineries has come from these industrial gas producers rather than on-site production, the amount of natural gas feedstock consumed by refineries to make hydrogen has changed very little (decreased by 1% from 2008 to 2014) even though refineries' total hydrogen use increased 60% in the same period. If the increase in refiners' hydrogen demand from 2008 to 2014 had been met with increased onsite production using refinery SMRs, the use of natural gas feedstock by refiners would have doubled over the 2008 - 2014 period.


Adapted from press release by Rosalie Starling

Read the article online at: https://www.hydrocarbonengineering.com/refining/21012016/growth-in-refinery-demand-for-hydrogen-2222/


 

Embed article link: (copy the HTML code below):