Skip to main content

Halliburton introduces CoreVault system for hydrocarbon measurement

Hydrocarbon Engineering,

Halliburton’s Wireline & Perforating business line has introduced the CoreVault™ system, a solution that provides an accurate volumetric picture of the amount of oil and gas trapped in unconventional reservoir rocks. The system for the first time allows operators to contain and bring the reservoir fluids within rock samples to the surface, allowing for measurement of the volume of hydrocarbons-in-place.

Measuring hydrocarbons-in-place - preserving the fluids in the core sample

David Topping, Vice President of Wireline & Perforating, explained that “prior to the development of the CoreVault system, when traditional coring tools were used to bring samples to the surface, they allowed 50 - 70% of the hydrocarbons to escape from the rock as the samples depressurised. Building a model of the volume of oil and gas in a reservoir, therefore, required operators to estimate this fluid loss rather than measure the fluids in place, and estimates were often inaccurate. By preserving 100% of the fluids within the core sample, the CoreVault system allows for an improved understanding of potential production within the reservoir.”

Saving time with targeted samples

The CoreVault system builds on the capabilities and reliability of the Halliburton Hostile Rotary Sidewall Coring Tool (HRSCT-B™) that recovers 1.5 in. OD cores at temperatures up to 400 °F (204 °C) and pressures up to 25 000 psi. The CoreVault system, when combined with the HRSCT-B tool, allows up to 10 cores to be sealed at reservoir conditions in a single wireline run, saving time over full-hole coring and allowing more targeted samples to be taken.

Don Westacott, Chief Advisor, Global Unconventional Reservoirs, said, “The samples taken with the CoreVault system often reveal dramatically more oil and gas in place than previous estimates would indicate. The information obtained can significantly enhance economic value and reduce exploration and development risk for our customers.”

An operator in Ohio and West Virginia used the system to retrieve 150 samples in five wells, with measurements of the samples showing 2.5 times more oil and gas in place than had been previously estimated.

Adapted from press release by Cecilia Rehn

Read the article online at:


Embed article link: (copy the HTML code below):