Skip to main content

Interpipe develops big diameter seamless pipes

Hydrocarbon Engineering,


Interpipe has begun producing a new produce – big diameter seamless pipes according to GOST and EN standards. The big diameter pipes are developed at Interpipe NTRP, where the previous maximum mill range was limited to 377 mm.

In October 2012, the experimental pipes of 426 mm dia. with 10 mm wall thickness were produced for Belorussian consumers. In January 2013 there has been one more break-through, a new dimension size of 406.4 mm dia. with wall thickness of 50 and 68 mm made according to GOST standard for the 32XA steel grade. These were developed for Polish consumers.

Finally, in the 3Q of 2013, Interpipe produced and delivered to German consumers pipes of 406.4 mm dia. with 10 - 77 mm wall thickness in accordance with European standards EN 10210-1,2 and EN 10297-1 in steel grades S355J2H/E355.

Ivan Mazanka, Regional Sales Director for Europipe at Interpipe, said “The big diameter seamless pipes are currently in high demand globally; however, the number of suppliers for these products is limited. For this reason manufacturing of pipes 406.4 mm and 426 mm in diameter according to euro-standards is a very good opportunity for us to meet these needs by delivering high quality products in accordance with our European customers’ requirements."

Background

Interpipe is a vertically integrated steel pipe and railway wheel company. It is among the ten largest producers of pipe products and the third largest producer of railway wheels in the world. The company’s products are supplied to more than 80 countries all over the world through a chain of commercial offices located in Ukraine, Russia, Kazakhstan, Europe, the USA and the Middle East.

In 2012, the company's mills produced about 1.26 million t of pipe and wheel products. Annual revenue from sales in 2012 amounted to US$ 2 billion.

Interpipe Steel is a key investment project for Interpipe that will provide the company’s steel and pipe production units with their own billets. The new plant’s capacity will be 1 320 000 tpa, which will make it the largest mill in Eastern Europe. Total investment in the project amounts to US$ 700 million.

Adapted from press release by Hannah Priestley-Eaton

Read the article online at: https://www.hydrocarbonengineering.com/product-news/24012014/interpipe_develops_big_diameter_seamless_pipes/


 

Embed article link: (copy the HTML code below):