Skip to main content

New method developed to produce cleaner diesel

Published by , Editor - Hydrocarbon Engineering
Hydrocarbon Engineering,


Researchers from KU Leuven and Utrecht University have discovered a new approach to the production of fuels. Their new method can be used to produce much cleaner diesel, which can quickly be scaled up for industrial use.

The production of fuel involves the use of catalysts. These substances trigger the chemical reactions that convert raw material into fuel. In the case of diesel, small catalyst granules are added to the raw material to sufficiently change the molecules of the raw material to produce useable fuel.

Catalysts can have one or more chemical functions. The catalyst that was used for this particular study has two functions, represented by two different materials: a metal (platinum) and a solid state acid. During the production process for diesel, the molecules bounce to and fro between the metal and the acid. Each time a molecule comes into contact with one of the materials, it changes a little bit. At the end of the process, the molecules are ready to be used for diesel fuel.

The assumption has always been that the metal and the solid state acid in the catalyst should be as close together as possible. That would speed up the production process by helping the molecules bounce to and fro more quickly. Professor Johan Martens (KU Leuven) and Professor Krijn de Jong (Utrecht University) have now discovered that this assumption is incorrect. If the functions within a catalyst are nanometres apart, the process yields better molecules for cleaner fuel.

“Our results are the exact opposite of what we had expected. At first, we thought that the samples had been switched or that something was wrong with our analysis”, says Professor Martens. “We repeated the experiments three times, only to arrive at the same conclusion: the current theory is wrong. There has to be a minimum distance between the functions within a catalyst. This goes against what the industry has been doing for the past 50 years.”

The new technique can optimise quite a few molecules in diesel. Cars that are driven by this clean diesel would emit far fewer particulates and CO2. The researchers believe that their method can be scaled up for industrial use with relative ease, so the new diesel could be used in cars in 5 to 10 years.

The new technique can be applied to petroleum-based fuels, but also to renewable carbon from biomass.


Adapted from press release by Rosalie Starling

Read the article online at: https://www.hydrocarbonengineering.com/clean-fuels/10122015/new-method-developed-to-produce-cleaner-diesel-1929/

You might also like

TotalEnergies and SINOPEC join forces to produce SAF

TotalEnergies and China Petroleum and Chemical Corp. (SINOPEC) have signed a Heads of Agreement (HoA) to jointly develop a sustainable aviation fuel (SAF) production unit at a SINOPEC's refinery in China.

 
 

Embed article link: (copy the HTML code below):