Skip to main content

Reducing cost and risk of bio oil upgrading

Hydrocarbon Engineering,


Battelle has reached an Energy Department project milestone to demonstrate at least 1000 hours of bio oil hydrotreatment on a single catalyst charge. Typically, it takes many catalysts to convert a bio oil intermediate into biofuel, making the conversion process expensive. Battelle’s new process substantially reduces the cost and risk of biofuel production and helps make the process more commercially viable.

The next step to increasing commercial viability is to achieve 4000 hours on a single catalyst charge, which would allow commercial operators to change out the catalyst only two times a year.

Battelle achieved this milestone with funding from the Bioenergy Technologies Office (BETO) and with help from scientists at Pacific Northwest National Laboratory. The project is the result of an Energy Department 2010 funding opportunity that invested up to US$16.5 million on seven advanced biofuel projects. The purpose of the Battelle project was to advance technologies for the thermochemical conversion of biomass into advanced biofuels that are compatible with existing fuelling infrastructure, that is, biofuels that can directly replace, rather than blend in with, petroleum fuel.

The BETO’s long term conversion goal is to validate pathways for conversion of drop in hydrocarbon biofuel at US$3/gal. gasoline equivalent. BETO has focused research and development projects in its Conversion Technology Area on eight biofuel conversion pathways for drop in hydrocarbon fuel since 2012, after successfully demonstrating cost competitive cellulosic ethanol.


Edited from press release by Claira Lloyd

Read the article online at: https://www.hydrocarbonengineering.com/clean-fuels/07052015/bio-oil-upgrading/

You might also like

TotalEnergies and SINOPEC join forces to produce SAF

TotalEnergies and China Petroleum and Chemical Corp. (SINOPEC) have signed a Heads of Agreement (HoA) to jointly develop a sustainable aviation fuel (SAF) production unit at a SINOPEC's refinery in China.

 
 

Embed article link: (copy the HTML code below):